Keypad, text about over min/max value only in Chinese?

terefere · 发表于 2022-7-12 03:47:40

本帖最后由 terefere 于 2022-7-12 03:52 编辑

Jest possible to change this text to other language in Visual TFT?. I don't see this option

If后要接end · 发表于 2022-7-12 18:24:57

Find a salesperson for the component technical group consultation

terefere · 发表于 2022-7-13 02:22:48

I find soltion, it's default text in "Input settings/Tip" in widget detials. About other problem, Today I talk with some enginner in Dacai about decimals, also sorry that I not respond for your PM- I have too small score at this forum and I cannot send message and I don't want to write it in public place. Maybe send me your email, then response from my mailbox.

If后要接end · 发表于 2022-7-13 08:57:18

Download this project and test

terefere · 发表于 2022-7-13 19:37:52

本帖最后由 terefere 于 2022-7-13 19:43 编辑

What I must check in this firmware?

If I set 30.4 then value show 30. If I set 30.6 then it show 31.
No decimals, no point on the screen.
If you mean about text with minimum/maximum vale then is OK. It's my fault as I write yestrday. If "tip" text is not set then default show chinese sign. DACAI made nice device but documentation.... ;/ web page I can translate easy, but pdf...

If后要接end · 发表于 2022-7-14 09:07:22

terefere 发表于 2022-7-13 19:37
What I must check in this firmware?

If I set 30.4 then value show 30. If I set 30.6 then it show 31 ...

Did you limit the value to not display decimals?

		自动登录	找回密码
密码			立即注册

Keypad, text about over min/max value only in Chinese?

本帖子中包含更多资源